Manufacturer Part Number
LM5109MA
Manufacturer
Texas Instruments
Introduction
The LM5109MA is a high-voltage gate driver specifically designed for half-bridge applications, capable of driving N-Channel MOSFETs.
Product Features and Performance
Half-Bridge Configuration
Independent Channel Operation
Supports 2 Drivers
Compatible with N-Channel MOSFET Gate Type
Supply Voltage Range between 8V and 14V
Logic Voltage Thresholds are 0.8V (VIL) and 2.2V (VIH)
Peak Output Current (Source/Sink) is 1A
Non-Inverting Input Type
Maximum High Side Voltage (Bootstrap) is 118V
Typical Rise and Fall Times are 15ns
Rated for Operations at Temperatures from -40°C to 125°C
Product Advantages
High-Voltage Operation for robust use in various applications
Efficient design for rapid switching performance
Capable of driving large loads with 1A peak output current
Thermal performance suitable for extended temperature ranges
Small form factor with 8-SOIC packaging for space-sensitive applications
Key Technical Parameters
Gate Type: N-Channel MOSFET
Voltage Supply: 8V to 14V
Logic Voltage: VIL: 0.8V, VIH: 2.2V
Current Peak Output: 1A
High Side Voltage Max (Bootstrap): 118 V
Rise / Fall Time: 15ns
Operating Temperature: -40°C to 125°C
Quality and Safety Features
Compliance with industry-standard safety regulations
Built-in protection features for over-voltage, under-voltage, and temperature extremes
Compatibility
Compatible with various N-Channel MOSFETs
Suitable for use in standard 8-SOIC package mounting
Application Areas
Motor Control Systems
Power Converters
Power Inverters
Switching Power Supplies
Product Lifecycle
Product Status: Obsolete
Alternative models or replacements might be suggested by the manufacturer for new designs
Several Key Reasons to Choose This Product
Reliable operation from a reputable manufacturer, Texas Instruments
High-voltage range suitable for power-intensive applications
Robust thermal and electrical performance characteristics
Compact size suitable for limited-space PCB designs
Obsolescence status necessitates securing inventory for maintenance or considering newer alternatives for design